How to find MP console IP address from the running HP-UX Operating system

This post is useful to identify the MP console IP address from the running HP-UX OS, if you forgotten the existing IP address.

For Itanium systems running 11.31 version only we can use smh and the cprop command. These both method works to recover the forgotten password.

cprop is what the smh webpage uses to retrieve the IP address. Run the smh webpage (hostname:hp_ux)

Home -> System -> Management Processor

It is show you the IP address of console port. Also please find the below "cprop" command usage, how to we run this command.

hp_ux:/>/opt/propplus/bin/cprop -summary -c “Management Processor”

[Component]: Management Processor

[Table]: Management Processor

——————————————————-

****************************************************

                   [Hash ID]: Management Processor:11a64d1ax41eed6da

                    [Status]: OK

                 [IPAddress]: 192.168.1.23

                       [URL]: https://192.168.1.23

                     [State]: Enabled

****************************************************

For PARISC boxes and Itanium models running 11.23 or earlier, you must use the serial port on the back of the box. The commands will be:

ctrl-a (to get the attention of the console interface)

<login> typically Admin and Admin

CM (to get to the command menu)

LC 

MA (to exit the CM menu)

X  (to exit the GSP or MP menu)

You can connect the MP console using serial cable, in every HP-UX server are consist this port. Connect the serial cable from one end of server MP port and other side connect to laptop. When you login on the MP console you will get the above option on the server.

ILO LAN console setup on HP-UX rp/rx systems

HP-UX Operating System are mostly used in IT industries because it is more secure and high reliable operating system. For managing hardware and software of HP-UX, ILO is in used.

ILO is a console for HP-UX servers, If your server operating system get crashed, then you can login in to ILO console and check all the logs related to failure as well as you can take a virtual console of OS from ILO.

Here, we will see how to configure the HP-UX ILO on specialized Unix server.

For initial setup, connect a serial terminal to the system. Use CONSOLE cable if there are multiple (usual HP bulkhead) 9600 bauds, 8N1. After that hit Ctrl-b after memory and CPU test at boot time, or if the system is already running

To modify the configuration, you can also telnet to the console IP address, and hit Ctrl-Shift-e , then c , then f to access the console and Ctrl-b to enter setup. You should see the ILO login prompt like that.

MP login: Admin
MP password: *********

Once you successful login, you'll see the ILO MP menu and find the different command to run. Please find the below MP main menu as given below.

MP MAIN MENU:

CO:   Console

VFP: Virtual Front Panel

CM:  Command Menu

CL:   Console Log

SL:   Show Event Logs

HE:  Main Help Menu

X:    Exit Connection

➤ Please select the CO command from MP main menu. The prompt changes to MP:CM> You are now ready to perform the configuration changes.

Note: The preferred method is always the directly connected terminal.

➤ The SA command shows you the Access Configuration menu. Change the settings so that it looks like that. This command allows you to modify MP access configuration.

Current Set Access Configuration:

R - Remote/Modem: OS SESSION

T - Telnet:                  Enabled 

W - Web SSL:           Enabled 

H - SSH:                    Disabled 

I - IPMI over LAN:   Enabled

Edit Section IP settings:

➤ The LC command shows you the LAN Configuration menu. Change the settings so that it looks like that.

Current LAN Configuration:

     MAC Address                              : 0x001a4b0add53
     D - DHCP Status                          : Disabled
     I - IP Address                               : 10.123.5.6
     M - MP Host Name                     : ethan-r
     S - Subnet Mask                          : 255.0.0.0
     G - Gateway Address                  : 10.123.0.1
     L - Link State                              : Auto Negotiate
     W - Remote Serial Console Port : 2023
     H - SSH Access Port                   : 22
     - - IPMI / LAN Port                     : 623

➤ You can see the current settings using the LS command. When you run the LS command it is shown you all current LAN configuration.

➤ The SO command with the O choice shows you the Security/Login options menu. Change the settings so that it looks like that:

Current Security Options:

     L - Login Timeout in minutes          : 1
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Disabled
     P - Allow MP password reset via IPMI  : Disabled

Edit Section Users:

➤ Use the UC command to view the User Configuration. If you can see the below my command output when you run the UC command on the command menu.

Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin         Default Admin         C, P, M, U       Yes
   2 - Oper            Default Operator      C                     Yes
   3 - root              root                           C, P, M, U       Yes

Using above all method section we can configure the ILO on HP-UX rp/rx system. Please make sure in every HP-UX system parametere are different , so you can change as per your requirment.

Please post the comment on the blog, if you have any query regarding this topic.